The rope making machine must pay attention to the operation specifications when working. Here are the operation steps of the rope making machine.
       1、 Put it on the horizontal ground, connect the power supply, check whether each transmission is normal, and lubricate each transmission part appropriately. Start the motor to see whether the running direction is consistent with the indicated direction. If not, turn off the power supply and replace the two wires of the capacitor and the motor, which can be consistent with the indicated direction.

       2、 Take an appropriate amount of the prepared straw, insert it into the two feeding mouths of the machine, and pass through the rope mouth to between the two rope pulleys.
       3、 After the power is turned on, the production can be completed by continuously inputting straw with the original forage.
       4、 When the rope reel is fully wound, turn off the power supply of the rope making machine, cut the straw rope near the wooden reel, remove the wooden reel, remove the straw rope bundle, and after the rope reel is installed, wrap the original rope head on the wooden reel for re production.
       The above is the knowledge about the operation of rope making machine summarized for you. I hope it will be helpful to you.